FASTSTACK ™ CHIMNEYS

Step 1
Delivered to site ready for pointing (on the ground).

Step 2
Crane into position on the trusses using the lifting eyes and loops supplied.

Step 3
Drill through support plates and screw to trusses using the fixings provided.

Step 4
Batten over the support plate as shown and tile the roof.

Step 5
Apply the supplied sealant to the channel before and after flashing.

Step 6
The lead is then dressed securely into the flashing channel.

Step 7
Job done! The finished chimney is in place.

Six styles to chosse from:

Othello

Aragon

Hamlet

Shylock

Hermia

Silius

Chimney Style & Location

Mid Ridge inc Twinwall

Gable End Ridge inc Twinwall

Mid Ridge Party Wall inc Twinwall (Twin Pot)

Othello 552mm x 440mm
Approx 175 kg

Y

N

N

Aragon 777mm x 552mm
Approx 210 kg

Y

N

N

Hamlet 665mm x 890mm
Approx 220 kg

Y

Y

Y

Shylock 1340mm x 865mm
Approx 230 kg

Y

Y

Y

Hermia 1002mm x 777mm
Approx 250 kg

Y

Y

N

Silius 890mm x 777mm
Approx 300kg

Y

N

N

Choose a chimney position that suits your building (check with the table above)

Gable End Ridges

The Gable End Ridge chimneys are designed to allow the brickwork to continue from the gable wall into the chimney unit.

Mono Pitch

Mono Pitch chimneys do not have the natural stability of the 'Ridge' units and therefore require additional fixing points.

Mid Ridge

In situations where the chimneys are not located directly over the gable wall, the Mid Ridge design can be used.